Oil Tank Replacement and Removal Concord, NH

Many homeowners in Concord, NH prefer an oil tank because of its affordability, great heating solution, little maintenance requirement and its long-term use. But even at that, there will usually be a need to replace an oil tank when it reaches or it's close to its life expectancy.

Replacing an oil tank usually requires that you hire an expert in the field, who's experienced and equipped with the tools to carry out the processes.

We would be discussing the steps and processes involved in replacing an oil tank in this article. You would also get to know about the cost involved, benefits and oil tank replacement near me

Benefits of Oil Tank Replacement

Oil tank replacement is important for your safety. It could protect your oil tanks from leakage which would in turn protect you from several health hazards.

When oil tanks have been in use for so long, they tend to rust as time passes by. You must take note of this before a part of it starts rusting.

Apart from that, you'll be qualified for homeowner insurance and with this, you are protected against any leak which could occur in the future that might amount to spending much on remediation.

Oil Tank Replacement Cost

On average, oil tank replacement cost $2900 to $3500. If you'll be working with a double wall or a Roth tank, the price could be up to $4000 or more.

Oil tanks vary in size but you'll most times see the 275-sized one in several homes. The cost of replacing your oil tank depends on some factors like the size of the tank, location of the tank and type, the closeness of your furnace and so on.

On another note, the price of oil tank replacement also depends on the company that you are hiring for this service.

Oil tanks typically last for 15-20 years and should be replaced afterwards. This helps ensure you are safe from any health hazards resulting from oil tank leakage.

Oil Tank Replacement Processes

When you decide to replace your oil tank there are a lot of processes that must be carried out. Doing this involves the service of a professional as some steps cannot be taken by just anyone except an expert who's knowledgeable.

Before beginning the replacement process, you'll be asked by your tank replacement expert if the oil tank is above or below the ground. Most oil tanks used at home are always above the ground.

In the following, we'll be focusing on the steps involved in replacing the above-ground oil tank. But before we proceed, it is important to note that residential oil tanks can either be placed indoors or outdoors.

Indoor and Outdoor Oil Tank

Indoor Oil Tank: these oil tanks are located in a calm, free area within the residential home. They are most times prevented from harsh environmental conditions and always placed above the ground. This is done to make replacing easy as it won't be palatable to start digging a residential home.

Outdoor Oil Tank: This, on the other hand, is placed outside of the home and can be located both above or below the ground. Since outdoor oil tanks are not inside a home, replacing a below-the-ground oil tank is possible. However, these oil tanks are not safe from poor environmental conditions.

Steps in Replacing an Above-ground Oil Tanks

Before the actual replacement process is done, the hired professional need to carry out two important steps

●      Visiting the replacement site:

The professional will be required to visit your home or the replacement site to gauge the condition of the oil tank. He'll also need to assess the size, features and location of the oil tank.

The site where the oil tank is installed also needs to be checked if there are conditions that could support or affect the replacement process.

All of this helps to ensure that the replacement process is done smoothly without any setbacks.

●      Securing the project permits:

You'll also be required to obtain a permit from your local tank department for tank removals. The professionals also would be required to get all the necessary permits before the replacement process commences.

When these two basic processes are achieved, then the replacer can start the replacement following the below steps:

●      Cautions should be taken to ensure that floor covering is prevented from stains. They could be covered or removed as necessary.

●      Doors should be wide open for easy entry when bringing in the tank. They might be removed temporarily if need be.

●      All residual oil in the previous tank should be pumped out.

●      Now that the tank is empty, place it brightly on one side and cut it in the middle.

●      Take this tank to the truck so it would be cleaned later

●      Take out the vent pipes and the fills

●      Pump out and take note of the previous fuel line

●      Transport the new tank inside and assemble its part.

●      Properly fix the new tank in the previous tank location or any other space you want.

●      Deduce, cut out and insert the fill pipes as required.

●      You might be required to create new holes based on the height of the installed tanks as opposed to the old ones.

●      Fix the vent and fuel pipes properly.

●      Fix the copper fuel line between the oil storage and the boiler.

●      Check out for all the fitting done. Ensure that all are highly fixed.

●      Now allow the pumping in of fuel. Fuel from the previous tank can be pumped into the new one but should be filtered.

●      Recheck the whole process to ensure there are no leakages.

●      Test the whole system if it's ready to be used and operated

●      Obtain the final permit from the local body and authority.

The above steps are suitable if the oil tank is to be installed indoors or out outdoors

However, if it's outdoor, additional steps like providing a rain shield or cover, cemented pad and a tank tub are necessary to be applied to protect the whole system from harsh environmental conditions

Oil Tank Replacement Near me

The process of replacing the oil tank is critical and should be done by an expert only. Inviting a professional to take on this job would save you a lot including saving you from several health hazards.

Because professionals are knowledgeable and trained, they remain the first person to go to for your oil tank replacement services.

If you reside in Concord, NH or its neighbouring communities and you are searching for oil tank replacement near me, then New Hampshire Oil Tank Replacement has got you covered.

You don't need to search far away, we are just a step away from you. We offer services ranging from the removal, replacement, repair, and installation of oil tanks and many more.

We are a team that works co-handedly to achieve our client's goals and we are the talk of the town when it comes to oil tank services in Concord, Hampshire.

Why should you use our service?

Well, we're unique and distinct from other companies. Here are some of our outstanding features that you cannot get from any other company.

●      We provide the service to you as expected and beyond expectation

●      We have a team that is qualified and experienced to carry out the oil replacement process without any flaw

●      We are cognizant of the rules of the local authority and we abide by it

●      We don't keep the old oil tank. They are well disposed to meet the EPA standards.

●      We develop a good relationship with our clients and we're always ready to listen to your questions.

●      We give a perfect oil tank installation as we understand that this would improve its lifespan

Contact us Today!

If you need oil tank services ranging from:

●      Oil Tank Replacement

●      Oil Tank Installation

●      Oil Tank Removal

●      Oil Tank Repair

●      And many more

Feel free to reach us at 603-931-4404. You can reach out to us if you have a question to ask. And we can also provide a quote via email to you when you give us some information. 

FAQ

Do I need to replace my oil tank?

Yes, you'll need to replace your oil tank if you notice any traces of damage like rust, discolouration or any other glaring physical damage.

Can I install an oil tank myself?

No, installing an oil tank requires the services of a professional who possesses the skill, knowledge and experience.

How long does it take to replace an oil tank?

An oil tank could typically last up to 15-20 years and even longer. However, if you notice damages before this time, you should replace them.

What is the best time to replace my oil tank?

Oil tanks are best replaced in the Spring. If there's a need for you to replace it in the winter, ensure you have an alternative heat source around.

How can I know how old my tank is?

If you aren't sure how old it is, you can reach out to us today so we can inspect it. Inspecting it would help you know how old the oil tank is and also guide you against problems.